How do I connect my D-Link wireless router?

How do I set up and install my router?

  1. Step 1: Unplug the power to your cable/DSL Internet modem.
  2. Step 2: Connect an Ethernet cable from your computer to a LAN port (Port 1, 2, 3 or 4) on the DIR-810L.
  3. Step 3: Connect your cable/DSL modem to the Internet port on the DIR-810L.

How do I configure my modem?

  1. Open up a web browser and type in theIP address of the DSL-300T (default is 192.168.
  2. Enter the Login nameand password (default is admin/admin).
  3. Click on the Setup tabat the top.
  4. Configure the following for yourconnection:
  5. Click on the Statustab at the top and then click on Connection Statuson the left side.

How do I access my D-Link router settings?

Step 1: Open your web browser and enter the IP address of the router into the address bar (not in google). The default IP is 192.168. 0.1, or using the link: http://dlinkrouter.local. Step 2: You should be taken to a D-Link login page.

How do I setup my DSL modem and wireless router?

Connect the wireless router to the DSL modem. Remove the Ethernet cable that connects the DSL modem to your desktop computer. Plug one end of the Ethernet cable into the DSL modem. Plug the other end into the wireless router.

What is IP address of modem?

Type ipconfig (Windows) or ifconfig (for Mac and Linux) and press Enter. Look for the Default Gateway line to find the IP address represented by a string of numbers and periods. You might also find the IP address printed on the back or underside of the modem, along with the user name and password.

How do I reset my D-Link modem?

Step 1: With the unit on, place a paper clip into the hole on the back of the unit labeled Reset. Step 2: Hold paper clip down for 10 seconds and release. Step 3: The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.

What is IP address for D-Link router?

192.168.0.1
Step 1: Open your web browser and type in the IP address of the router (192.168. 0.1 by default). Step 2: Enter the username (admin) and password (blank by default), and then click OK or Log In.

How to setup Dlink WiFi router step by step?

How to setup Dlink wifi router step by step? – YouTube What is eToro™? If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

Do you need a modem for a D-Link router?

DSL users without modem – If you have a DSL connection and your ISP hasn’t provided a modem, then we need to use PPPoE to connect the D-Link router. Check if your ISP has provided you with the PPPoE credentials, you will need this to connect the router to the internet.

How do I Reset my D-Link router to default settings?

To reset your device to default settings, press and hold the reset button (on the back of the router) for 10 seconds and release. The lights on the front of the router should all flash and reboot. – Return to step 5 The Router will perform a scan to determine the type of internet service you have.

Where do I enter my D-Link router password?

Open your browser and navigate to http://192.168.0.1, the default IP address of the D-Link router. 2. Enter the D-Link router password The default router password of a D-Link router is nothing ( blank ).