How do I use my RCA remote?

  1. Power on the equipment you want to pair.
  2. Press and hold the Code Search button on the universal remote control until the light turns on.
  3. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a DVR, press the button for DVR).

How do I program my RCA universal remote RCR?

Press and hold the device key you want to program. While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time. Wait until the remote’s indicator comes on and stays on. Then release both keys.

What are the codes for a RCA remote?

Universal Remote Control Code List For RCA Remote Controls

  • Abex TV 1172.
  • Admiral TV 1001 , 1046 , 1047 , 1083 , 1095 , 1173 , 1191 , 1211.
  • Admiral VCR 2001.
  • Advent TV 1005 , 1062 , 1219 , 1238 , 1291.
  • Adventura TV 1174.
  • Adventura VCR 2026.
  • Aiko TV 1016.
  • Aiko VCR 2027.

What is the 3 digit code for RCA TV?

RCA Universal remote code for setting up TV

Brand Code
rca remote code for Abex TV 172
rca remote code for Admiral TV 001, 046, 047, 083, 095, 173, 191, 211
rca remote code for Adventura TV 174
rca remote code for Aiko TV 016

How do you reset a universal RCA remote?

Reset steps:

  1. Remove the batteries.
  2. Press and hold down the #1 button on the keypad for 60 seconds – Note: You may need to do this 3-5 times to clear the remote.
  3. Insert batteries.
  4. Begin reprogramming – Note: After resetting the remote control, reprogramming is required.

Is there a way to program an RCA remote?

An easy way to program an RCA universal remote is through the Code Search Button. You just need to enter the device codes to connect the devices together. Here are all the steps that you need to take:

How many manuals are in an RCA remote control?

1 – 15 out of 111 Model Number of Manuals D770 2 manuals D940 1 manual OARP05S 1 manual RCR311B 4 manuals

Can a universal remote be used as a command center?

With the proper setup, this type of remote will be the perfect solution and act as a command center to your TV/component/audio system. If you are searching for how to program rca universal remote then you can use the RCA universal remote code list, you can program your remote appropriate to your system.

How do you turn on a universal remote?

Step 1: Turn on the device you want the remote to operate. Step 2: Press and hold the “CODE SEARCH” button until the indicator light illuminates, then release. Step 3: Press and release the device key that corresponds to the equipment you want the remote to operate (TV, VCR/DVD or DBS/CABLE etc.).