What is a sewer line cleanout?

The sewer clean out is a pipe or pipe(s) with a cap that provides access to the sewer line so that blockages can be removed. The lateral sewer line is the sewer line that connects your home to the main public sewer system. Usually, the sewer cleanout is located somewhere along the lateral sewer line.

Where should a clean out be installed?

Clean-outs should be accessible at the surface and located in a protective enclosure such as a valve box when necessary. There should be at least two clean-outs in the building drain: one at or near the base of the stack and one near the connection between the building drain and the building sewer.

Why do you need a two way cleanout?

A two-way cleanout provides access in both directions. With this U-shaped cleanout, we are able to use it to access both the yard and the house lines.

How much does it cost to install a sewer cleanout?

Sewer Cleanout Costs Installing a cleanout will run an average of $2,000. The pipe and materials cost between $70 to $150 with tools and equipment running another $300 to $500.

Where is the main sewer line cleanout?

The cleanout is usually a 4-inch-diameter pipe with a screw cap that has a square knob or indentation on the top. It’s most likely going to be popping up from the ground outside your home between the foundation and the street. The cleanout might also be on the side of the home, closest to the bathroom.

Can toilet paper clog a sewer line?

Eventually, toilet paper or other debris gets snagged on the roots, further preventing water from flowing through the main sewer drain line. Flushing sanitary products, such as paper towels, facial tissues, feminine hygiene products or even extra-thick toilet paper, can also clog your sewer line.

Is a toilet considered a cleanout?

The toilet is not considered a cleanout. You can run the vent with the same size pipe, and put the cleanout on the vent.

What does a sewer cleanout line look like?

How much does it cost to install a 2 way cleanout?

Installing a cleanout will run an average of $2,000. The pipe and materials cost between $70 to $150 with tools and equipment running another $300 to $500.

How do you clear a sewer line?

One of the best ways to clean a sewer line is to use a garden hose. Simply insert the hose’s nozzle into your sewer line’s clean-out plug and give the line a good spraying. This tip is best utilized when cleaning a sewer line that is not terribly dirty or one that has recently fallen victim to a stubborn clog.

Where is my sewer line cleanout located?

One way to find it is to visualize a line from a floor drain running out toward the municipal sewer lines, which usually lie beneath the street. In most cases, the main clean-out will be located at some point along this line from floor drain to street. May 30 2019

How do you clean out a sewer pipe?

Sometimes water alone isn’t enough to keep pipes clean, particularly if they are old or connected to your local sewage plant. In that case, use bleach to clean and disinfect the pipes and dissolve clogs. Once a month, pour 12 ounces of chlorine bleach straight down the drain at the end of the day.

How much does it cost to clean a sewer drain?

The cost of cleaning depends on the length of the drain to be cleaned, the level of blockage, and time spent. On average, Hydrojet cleaning can cost anywhere from $100 to $300 for a simple floor drain to as much as $600 or more for the main sewer line.