What reciprocating saw has the longest stroke?
Dewalt 20V Max
Our Top Pick For a Reciprocating Saw: Dewalt 20V Max The longer stroke length and faster speed on this model will allow users to get the job done in half the time.
What does stroke length mean on a reciprocating saw?
Stroke length is the distance the blade covers with one forward movement. The longer the stroke length, the faster the cut and the longer your saw blade with last.
What is stroke length on a saw?
The cutting capacity of a jigsaw is determined by two factors: stroke length and stroke rate (measured in strokes per minute, or spm). A jigsaw’s stroke length is the distance the blade travels up and down while cutting. A longer stroke allows any sawdust or swarf produced to more effectively escape from the cut.
What kind of motor is in a reciprocating saw?
Reciprocating saws, introduced in 1951, quickly became favored tools of contractors. Many of today’s saws have big 10-amp motors, variable speeds, no-wrench blade changing and 1-1/4 in. cutting strokes.
Is a 6 amp reciprocating saw powerful enough?
Since you are not on the clock and needing to demolish a huge load of old wood or plywood in excellent condition and the project is small, a 6 amp saw will be sufficient for your purpose.
How thick of wood can you cut with a reciprocating saw?
But in actual practice, you can cut trees up to 6 to 8-inches thick with a reciprocating saw. It is better to say that the object which needs to be cut should be smaller in diameter than the length of the blade itself.
Does a scroll saw cut on the up or down stroke?
One thing that you must always remember is that there is an up and a down on a scroll saw blade. Scroll saws cut on the downstroke of the blade. For the scroll saw to operate properly and safely, the scroll saw blade must install into the saw in the proper direction.
How thick can a reciprocating saw cut?
Heavy duty blades tend to be . 875-inches wide and 0.062-inches thick. Blades 0.035-inches thick provide adequate strength for standard cuts. Blades 0.05-inches thick provide enhanced stability.
How many amps do you need for a reciprocating saw?
Reciprocating saws vary from about 9-15 amps of power. A 15 amp recip will run you $180-250 right now, but if you’re a contractor you might need that kind of power on a day to day basis. 11 amps should be plenty for the DIYer with a big demolition project.
Why do they call a reciprocating saw a Sawzall?
It’s not hard to see how the nickname developed since a reciprocating saw indeed “saws all” materials. Depending on the type of blade installed, it can cut through lumber, metal, plywood, plastic and cast iron pipe—you name it—making it a favorite of remodelers.
Can I use a reciprocating saw to cut tree limbs?
You can cut branches and limbs with a reciprocating saw. If your tree is small enough, you can cut a tree down. Bear in mind, these saws are ideal for cutting stationary material. If there’s a lot of give to your branch or limb, the saw may just shake it rather than cutting through it.
What does the stroke length of a reciprocating saw mean?
The stroke length of a reciprocating saw refers to the distance of travel the blade makes with every cycle. The longer the stroke length, the faster and more aggressive the tool can cut through the material.
Which is better a reciprocating saw or a regular saw?
If you often use your reciprocating saw in tight areas, having a tool with a shorter stroke length can actually give you better control. A tool with a shorter stroke length is also less likely to throw you off if it binds or kicks back, as well. A longer stroke length on your reciprocating saw, on the other hand, gives you more aggressive cuts.
Can a reciprocating saw have a brushless motor?
This newer type of motor technology is not limited to just reciprocating saws – nowadays, you will find brushless versions of just about any consumer grade power tool, from drills and circular saws to angle grinders and sanders. One of the main advantages that a brushless motor gives you is higher efficiency.
What are the features of an orbital reciprocating saw?
An orbital reciprocating saw usually comes with a lever that lets you access two or more orbital action settings. This way, you can set the tool to only do straight cuts, or use increasingly more aggressive orbital action with every stroke.