Why is my SSD not a boot option?

If your SATA SSD is not listed in boot options, it’s possible that you didn’t clone your disk properly. The software offers system backup, so it will be able to create an identical system backup and move it to your SSD. Of course, you’re not limited just to system backup, and you can back up both disks or partitions.

How do you fix an SSD that won’t boot?

How to solve SSD not booting problem?

  1. Make sure the SSD is connected to your computer.
  2. Restart your PC. Press a specific key continuously to enter BIOS Setup (usuallyF2, F8, F12, Del key).
  3. When you get into the BIOS Setup, use the arrow keys to select the SSD as the first boot order under Boot tab.

How do I force an SSD to boot?

With the following simple steps, your computer will boot Windows from SSD at once:

  1. Restart PC, press F2/F8/F11 or Del key to enter the BIOS environment.
  2. Go to the boot section, set the cloned SSD as the boot drive in BIOS.
  3. Save the changes and restart the PC. Now you should boot the computer from the SSD successfully.

How do I enable SSD in BIOS?

Solution 2: Configure the SSD settings in BIOS

  1. Restart your computer, and press the F2 key after the first screen.
  2. Press the Enter key to enter Config.
  3. Select Serial ATA and press Enter.
  4. Then you’ll see SATA Controller Mode Option.
  5. Save your changes and restart your computer to enter BIOS.

How do I know if my SSD is failing?

SSD Failure

  1. Files can’t be read from or written to the drive.
  2. The computer runs excessively slow.
  3. The computer won’t boot, you get a flashing question mark (on Mac) or “No boot device” error (on Windows).
  4. Frequent “blue screen of death/black screen of death” errors.
  5. Apps freeze or crash.
  6. Your drive becomes read-only.

Where is boot menu on SSD?

Restart PC > Press F2/F8/F11/DEL to enter BIOS > Enter Setup > Turn on SSD or enable it > Save the changes and exit. After this, you can restart PC and you should be able to see the disk in Disk Management.

Can dead SSD be fixed?

Fix a Dead SSD Drive Using Power Cycle Way. If the SSD is already on your computer, pull the data cable, but not the power cable. If you’re installing the SSD in a desktop or connecting it to a loose power supply temporarily, repair SSD in this way. Let the drive sit powered on for another 30 minutes.

How do I make my main drive my SSD?

Set your controller to AHCI or ACPI if that is what your BIOS supports. Set the SSD to number one in the Hard Disk Drive Priority if your BIOS supports that. Then go to the separate Boot Order Option and make the DVD Drive number one there. Reboot and follow the instructions in the OS set up.

Why is my SSD not showing in BIOS?

The BIOS will not detect a SSD if the data cable is damaged or the connection is incorrect. Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.

Why is my Windows 10 SSD not booting?

According to some users’ feedback, Microsoft programmers have analyzed inaccessible boot device error in Windows 10. They said imperfect system code and poor compatibility of previous versions could lead to incompatibility of graphic card driver with system code, thus causing inaccessible boot device error finally.

What to do if cloned SSD won’t boot?

Step 1: Because cloned SSD won’t boot and we could not get into Windows 10, we have to boot from the old hard drive. Then put the SSD in the hard drive enclosure and connect the case to the PC. Step 2: After you boot from the old hard drive, press “Win” + “R” to open Run box and then type in: diskpart.

What does it mean when windows says SSD is inaccessible?

What’s worse, some users are stuck in endless boot loop where Windows tells SSD is inaccessible and where it tries to fix the error but constantly fails. When you see “Inaccessible Boot Device”, it means your computer cannot read the Windows partition on the hard drive it boots from.

How to make Windows boot from a SSD?

1 Solutions 1. Set Windows to Boot from SSD via BIOS. If your computer cannot boot after upgrading or replacing system disk from HDD to SSD, the proper reason for this 2 Solution 2. Rebuild the SSD and Set it as Active. For this case, we suppose your SSD is MBR. 3 Solution 3. Fix the BCD Error to Make the SSD Boot.