How do you read a Badger meter on a water meter?
The Badger ADE meter is read from left to right. The first 4 numbers are the 1000’s that we read (example – 453,286 gallons total went through this meter since it was installed). If the RED circle is moving, there is water currently flowing through the meter. The Sensus meter is read from left to right.
How do I read my water meter in gallons?
To read a water meter in gallons, take note of the number at the bottom of your water meter. The number to the far right is a “standing 0”, represented by the number of gallons used as indicated by the hand. The meter above is an analog meter that reads: 302152 gallons.
What is a read O Matic?
The Badger Read-o-Matic provides an economical, time-proven method of obtaining remote readings from gas meters that are installed in basements, on rooftops or in other hard to reach locations.
How do you read a Sensus 5/8 Water Meter?
5/8” to 1” Sensus Iperl Meters The six wheels to the left of the decimal are measuring in cubic feet, and the three wheels to the right of the decimal will measure down to . 001 cubic feet. If you want to read in 100 cubic foot increments (Ccf), you would write down the first four (4) numbers from the left.
What does Badger meter do?
About Badger Meter, Inc. The Company’s products measure water, oil, chemicals and other fluids, provide and communicate timely measurement data.
How do I know if my water meter is accurate?
To test the accuracy of your meter, use the following procedure. Run water until the last three digits on your meter reading are all zeros. Then fill a one-gallon container with water. The last three digits on your meter should read .
How do you calculate water consumption?
To determine the amount of water used since your last reading, take the current meter read and subtract the previous meter read (from your water bill), which will give you the number of cubic meter/s used.
How do you calculate water per cubic meter?
For best results, read your meter at the same time each day. Meters measure water use in cubic meter. To determine the amount of water used since your last reading, take the current meter read and subtract the previous meter read (from your water bill), which will give you the number of cubic meter/s used.
What do you need to know about Badger read O Matic?
Read-o-Matic was the original outdoor register for water meters and the idea was so well accepted that Badger developed a Read-o-Matic especially for all hard case gas meters. Badger Read-o-Matic is helping thousands of utilities to save time, money, and manpower with meter-reading.
What kind of technology does Badger Meter use?
Badger Meter has expanded its smart water offering with the acquisitions of Analytical Technology, Inc. (ATi) and s::can GmbH, two leaders in water quality monitoring solutions.
How is the read O Matic remote Register connected?
Mounted on an exterior building wall, the Read-o-Matic remote register is connected by wire to the generator on the meter. Gas flowing through the meter provides all the energy needed to operate the generator and the outdoor register.
Which is the best Smart Water metering system?
Our smart water solutions feature innovative, industry-leading technologies and one of the widest selections of metering products.