How do I attach a flag to Guidon?

The Army and Air Force Method is for all flags and guidons. The Velcro tab must be mounted on the flat side of the spade so that where the fringe gathers at the top of the pole hem is on the other flat side of the spade. When carried, the point where the fringe meets faces behind the color bearer.

What are the dimensions of the guidon flag?

As described in Chapter 6 of Army Regulation 840-10, guidons are swallow-tailed marker flags in branch-of-service colors, measuring 20 inches (51 cm) at the hoist by 27 inches (69 cm) at the fly, with the swallow-tail end forked 10 inches (25 cm).

How do you sew a flag?

Stitch the hem down with invisible thread or red thread. Fold under 1/4″ on each 4″ end of the 33″ by 4″ white strip. Fold the strip in half lengthwise, and fold each edge into the middle. Sandwich the raw edge of the flag inside the folded strip, and stitch it into place.

How do you hang a flag with grommets?

Hanging a Flag from a Pole Connected to the Wall Hold the flag length-wise with the pole and pass a cable tie through the grommet. Pull the cable tie tight to secure it to the pole. Repeat for the other grommet and the hanging will be complete.

What are the 4 parts of guidon?

Terms in this set (4)

  • Banner. …
  • Staff. …
  • Ferrule. …
  • Ornament. …

How do you pass the guidon?

The Incoming commander passes the guidon to the First Sergeant (4) who grasps it with his right hand above his left hand, faces about and returns the guidon to the guidon bearer. This procedure (1-4) allows the guidon to be over the heart of the Incoming and Outgoing commanders.

How do you read a guidon?

Letters and numerals read from left to right on each side of the guidon. The letters and numbers on guidons are 3 1/2 inches high unless otherwise indicated. Today, when a Shoulder Sleeve Insignia (SSI) is authorized for use on the guidon, the design will appear proper on both sides.

Can I sew 2 flags together?

The only way a flag can be made to read “correctly” on both sides is to make 2 flags and then sew them back to back. Also, a liner must be inserted between the 2 flags to eliminate “flash through”.

Why does my flag wrap around the pole?

When a strong gust of wind occurs, it forces the flag to wrap over the pole. Because it’s such a common problem, some flag poles (like these) are designed specifically to keep the flag straight. They feature a spinning pole shaft or rings that turn automatically during strong winds.

Where can I buy military flags and guidons? is your one stop shopping source for Custom & Regulation Military Guidons, Flags, Streamers, Framed Guidon Gift Sets, and accessories. All of our military products are made too military regulations and conform to U.S. Heraldry specifications.

What kind of material is a guidon flag made of?

Full custom, digitally printed Guidon flag with print and canvas header finishing options. Materials – We have two material options available. 200 Denier Nylon – UV Coated with Dupont SolarMax coating. This is the standard flag material in the United States. Most US Flags and State Flags you see are made of Nylon.

Which is the best way to sew a flag?

Unless you have a preference, then we recommend you let our staff’s knowledge and experience give you the best flag. Sewing – All flags are sewn with double needle lock stitching on the top and bottom, with four rows of lock stitching on the fly end. This provides the strongest finishing possible.

Where does the guidon stand in the military?

He stands in front of the unit alongside of the commander (or the commander’s representative, such as the first sergeant), and is the rallying point for troops to fall into formation when the order is given. In drill and cermonies the guidon and commander are always in front of the formation.