How do you open a plier stapler?
To load these plier staplers remove the magazine pusher by pressing it in and unhooking it. Place the staples, legs down, across the staple channel and slide into the chamber. Carefully reinsert the magazine pusher and press the spring home allowing you to hook it back in place.
How do you unblock a stapler?
To start, open the stapler completely so that the top and bottom are in a horizontal line. Before attempting to use household objects, try giving the stapler a light shake to see if the staple will just fall out. If unable to shake the jammed staple out, try to staple a single sheet of paper while the unit is jammed.
How do you unlock a stapler?
Hold the top of the stapler magazine with two fingers and slowly, while maintaining firm pressure, start pulling the lid apart from the part of the magazine that holds the staple. Be careful not to do this too quickly, or the lid might again fly open, spraying the staples all over your office or desk.
How do you staple a stapler flat?
Open the stapler. To open these, grip the base of the stapler, then pull the top of the stapler until it lifts open and the staple tray is revealed. Back load staplers usually have a button on the back, so to open these, push the button until the stapler tray pops out slightly.
What is a staple made of?
General office staples are made of zinc-plated steel wire. They start their life in a thick coil. The coil is unrolled, drawn through steel dies to reduce the wire to its proper diameter, and rolled back into heavy 2,500-pound rolls.
What is a plier stapler?
Specialty & Plier Staplers Bostitch plier staplers are ideal for a wide variety of heavy duty stapling. Plier staplers use a lever action that allows them to be more ergonomic and comfortable in the hand.
Why has my staple gun stopped working?
When any important part is broken or worn out, the tool simply won’t work. Make sure you are using staples of the correct size and type for the tool. Small variances can gum up the works and cause staples to jam or defeat the spring or hammer mechanisms.
What to do if your stapler loads from the back?
If your stapler loads from the back, pull out the staple tray and set it to the side. This is also a great time to check that you’re using the right size of staples. If you work in an office with multiple sizes and brands, you may have accidentally loaded it with the wrong size.
How do you get a jammed staple out of a stapler?
Removing a Jammed Staple Place an object between the stapler and the base to try and unjam it. Open the top of the stapler and remove the excess staples. Pull the tray away from the base to gain better access to the jam. Use a sharp object to push the jammed staple up from the bottom.
How to order Josef Kihlberg stapler parts online?
See the part Item No. in the tool schematics below. Go to Quick Order Form page and enter your part and quantity into the form online, then click “Add Items”. Your part will be added to the shopping cart. Complete the order through the check-out process. We have $10 Min Requirements for parts order.