How does Plate reverb sound?
Plate reverb is usually described as having a smooth and bright tone. It’s great at helping melodic instruments shine through the mix without sounding too harsh. But it also has a slightly unnatural tone. Plate reverb units don’t really emulate how reverb usually works in the real world.
What is plate reverb good for?
When to use plate reverb As you can imagine, the sound of a metal plate physically vibrating creates a bright-sounding effect. These qualities make plate reverb a go-to option for vocals, snare drums, percussion, and other elements that need to distinguish themselves within the mix.
Is Plate reverb best for vocals?
Reverb has a big impact on the tone of the source. And in general, that’s why plate reverb works well on vocals. Now, let’s go back to the idea of short decay times, because shorter decay times also work well on vocals, because we don’t want to make the vocal go too far back in the mix.
How does Plate reverb work?
The plate gets vibrated in accordance with a signal from a transducer and the vibration is sensed elsewhere on the plate with a contact microphone of one type or another. Put your ear up to any large metal item and tap on it and you will hear how steel plates were used to create reverb.
What is the difference between spring reverb and plate reverb?
Plate reverbs tend to sound very dense and bright, which makes them good for vocals and drums. Plates are quite large, and tend to be used in recording studios. Spring reverbs tend to produce twangy and percussive reverb effects, which can sound fantastic for guitar.
What’s the best reverb for vocals?
What Are The Best Vocal Reverb Plugins?
- Audio Ease Altiverb (Our Pick!)
- Valhalla DSP Plate (Best Value)
- Waves H-Reverb (Best Value)
- Universal Audio UAD Lexicon 224 Digital Reverb (Runner Up)
- LiquidSonics Seventh Heaven.
- FabFilter Pro-R.
- Slate & LiquidSonics VerbSuite Classics.
What type of reverb is best for vocals?
synthetic reverbs
In my view, synthetic reverbs (or convolution samples of synthetic reverbs), with their larger-than-life sound, are still the first choice for pop vocals, though the choice of decay time is harder to pin down, as it can vary from around two seconds for some ballads to less than one second where you’re after a tight.
How can I make my vocals clearer loud?
10 Ways to Make Vocals Sound Modern & Professional
- Top-End Boost.
- Use a De’Esser.
- Remove Resonances.
- Control the Dynamics with Automation.
- Catch the Peaks with a Limiter.
- Use Multiband Compression.
- Enhance the Highs with Saturation.
- Use Delays Instead of Reverb.
Should you put reverb on everything?
You Put It on Everything You can use reverb to make this happen. It only works, however, when you use it selectively. If you drown everything in reverb, there will be no contrast. Everything will sound far away, and nothing will sound close.
What is the difference between a spring reverb and a plate reverb?
Do you need spring reverb?
It’s a must if you’re writing rock, blues, reggae, or really anything with electric guitar. But its uses go way beyond that. Spring reverb has an extremely unique sound, making it perfect for all kinds of effects.
What do you mean by plate reverb in audio?
Plate reverb is an audio effect that is derived from and added to an original sound that adds a series of echos that occur in such rapid succession that they aren’t heard as single events but as a “smearing out” of the original sound.
How does the decay of a plate reverb work?
The timing between pressure waves at the beginning of a plate reverb’s decay is the same as when that decay is tailing off. In a three dimensional room this is not the case. The first set of reflections are fewer and spaced further apart, but as the decay gets later and later the echoes are coming in with greater density.
What kind of resonance does a plate reverb have?
Plate reverb is the broadband resonance generated by vibrating a larg e metal sheet. A large metal sheet is suspended with tension springs inside of a housing case.
What’s the difference between reverb and a room?
Plate reverb is the sound of vibrations through metal, while rooms are the sound of vibrations through air. Sound moves through the metal of a plate anywhere from ten to twenty times faster than it does through the space of a room.