Why is my Kenmore front load washer not spinning?

Common solutions for: Kenmore Washer won’t spin or agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If the lid switch assembly fails, the washer will not spin.

What would cause a front load washer not to spin?

Front-load washer tubs spin thanks to a drive belt that runs off of the motor. A loose, frayed, or torn belt could be why your washer won’t spin. Overloading your washing machine can cause the belt to loosen or become worn out. Inspect the drive belt closely.

Why is my washer running but not spinning?

An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. If you suspect a distribution problem, try rearranging your clumped-up wet laundry and running the spin cycle again.

Why is my top loader not spinning?

If the belt mechanism is loose or slipped or the belt is damaged, it may not be spinning with enough force. If the belt is broken or fully off the rollers, then it won’t spin at all. A washer that won’t spin isn’t washing. If it can’t agitate clothes, then clothes don’t get clean.

How do you reset a front loader washing machine?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

Why is my Panasonic washing machine won’t spin?

It can be caused by the followings: Lid cover is not closed properly; drain hose outlet level is higher and uneven wash load etc. When the laundry was unbalanced during spinning time, rinsing and automatic correcting of unbalanced clothing will occur and spinning process will resume later.

Why isnt my washer draining?

There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

Why is my Kenmore washer not draining?

When a washer won’t drain, it’s usually because there’s a clog or the pump is broken. If you figure out what’s causing the issue, you may be able to fix it yourself. To find out what’s preventing your washer from draining, you’ll need to access the parts of your machine to check for damage or clogs.

Why is my front load washer not draining?

The Front Load Issue Drain pump. It is pretty normal when a small clothing get stuck within the drain pump. Obstructed hose or pump. Just like the previous case, a small part of the clothing can go to the drain system, obstructing the pump or the pump hose. Opened lid. Door lock switch and motor assembly.

Are front loading washing machines bad?

Front load washers are a go-to option for any home because of their efficiency and flexibility. They have a good reputation for water conservation and gently cleaning your garments in their roomy drums. They also typically come with an added feature.

Why does my front loading washing machine stink?

Cleaning the Drain Pump in Front Load Washers. Another reason why washing machines start to smell is due to debris stuck in the drain pump in the machine. Cleaning out the drain pump will help get rid of things that are blocking proper water flow within the machine. Front-load washers normally have a filter or trap within the drain pump.